When we talk about the highly efficient spray gun then we cannot forget ANEST IWATA W-400 134g 1.3mm Bellaria Automotive Spray Gun because of its wide popularity among the automotive paint industry.
The ANEST IWATA W-400 has tons of models which are considered the best automotive gun if you are a beginner. Some of the key specifications and reviews of the ANEST IWATA W-400 1.3mm Bellaria Automotive Spray Gun are given below with a detailed guide.
Table of Contents
ANEST IWATA W-400 134g 1.3mm Bellaria Reviews
The ANEST IWATA W-400 is a highly efficient spray gun that balances the color pattern when spraying. It’s 1.3mm universal fit nozzle is a major advantage though you can use water-based paint easily.
You can easily attach the gravity feed cup to the top of the gun without wasting paint. The gravity feed does not require much pressure to throw out the paint and you can paint more.
We compare both the products of ANEST IWATA W-400 with the previous one and found that this gun is 15% lighter than the last product.
One disadvantage that we face, you will not get any cap with the spray gun. Instead of this, we do not face any other difficulty in its higher transfer efficiency to the surface.
ANEST IWATA W-400 Specifications
Higher Transfer Efficiency
The Anest w400 has the perfect automatization features which increase the overall performance and make the high-efficiency spray gun. By the higher transfer efficiency term, it means you will get stable and consistent movement and finish look while spraying.
Nozzle 1.3mm
The Anest Iwata spray gun we are reviewing has a 1.3mm nozzle size which is perfect for base coats and water-based painting. But for heavier projects and to use primmer you need to select a 2.0mm nozzle and it can be easily attached with this gun.
Gravity Feed Type Spray Gun
Gravity feed type means the cup will be upside down and attached to the top of the gun. By this, you can easily use all the paint without increasing the pressure from the air compressor just as in the case of siphon-feed type.
Anest iwata w400 belleria PSI & CFM
The Anest Iwata w400 works under 10PSI for consistent spray work and with air consumption of 1.5 CFM. At the back, you get a controller and knobs to adjust the pattern size from circular to vertical with the desired pressure.
Product Description
The manufacturer part number is W-400-134g by the brand and manufacturer of ANEST IWATA. The spray gun is 15% lighter in weight which is about 1.06 pounds along with the whole package dimension “8.66 x 5.2 x 2.05” inches.
ANEST IWATA W-400 Parts
The parts of Anest Iwata w400 are available in the market, so if you want to repair and look for its tool you will easily get it without any further difficulty.
Advantages/Disadvantages of ANEST IWATA W-400 134g 1.3mm Bellaria
They’re some of the advantages and disadvantages of the ANEST IWATA W-400 134g 1.3mm Bellaria that we see. The gun is beautifully designed with a mixture of colors and its body type is made up of good quality. At this price, you can not get a better spray gun than this in the market. Also, 134g (1.3mm Nozzle) is perfect for automotive surfaces for a smooth finish.
No cap associated with the nozzle is the one and only major downside that we see with the ANEST IWATA W-400 gun. Also, you can add the air pressure meter at the bottom of the spray gun.
